Talbert 65-Ton Spread-Axle Trailer With E2Nitro

Thu July 17, 2014
Truck and Trailer Guide

The 65-ton spread-axle trailer outfitted with the E2Nitro nitrogen-assisted equalizing system by Talbert Manufacturing provides haulers the versatility they need to switch axle configurations and comply with individual state road regulations. This trailer also can be operated in a 70-ton (63.5 t) close-coupled configuration.

Haulers can use the 65SA with a close-coupled fourth axle for a 70-ton rating or a spread-axle configuration for a 65-ton rating, and the trailer’s empty weight is lighter compared to West Coast-style trailers. The trailer’s East Coast-style E2Nitro spreader features a bearing pivot and pivot lockout for backing the trailer. In addition, the E2Nitro operator can hydraulically set axle loads and keep them there in all terrains. It also allows for a 14-ft. 1-in. (4.2 m) spread between the third and fourth axle, which is ideal for haulers traveling into states that require that spread.

The E2Nitro system articulates left and right and uses nitrogen to equalize the up and down movement to provide proportionate weight distribution in each axle grouping. Through a combination of hydraulic and nitrogen equalization, the E2Nitro absorbs hauling and loading shocks and provides a greater range of suspension movement for reduced stress and a smoother ride. The system also acts as a hydraulic shim point between trailer and spreader. The E2Nitro also incorporates two-speed dual landing gear for greater stability when it is disconnected from the trailer. Finally, the 65SA with the E2Nitro makes movement on job sites easier because operators can lift rear axles when backing up or turning around.

The Talbert 65SA features a 70-in. (178 cm), flip-up gooseneck extension to achieve a 190-in. (482 cm) radius. The unit also offers removable kingpin stations for 120 and 108-in. (305 and 274 cm) swing radiuses, a 30-ft. (9 m) deck length and an 8-ft. 6-in. (2.6 m) deck width. And, like all its trailers, Talbert manufactures the 65SA with heavy-duty T-1, 100,000-psi minimum yield steel. Optional deck lengths, deck types, and widths of 9 ft. (2.7 m), 9 ft. 6 in. (2.9 m), and 10 ft. (3 m) also are available..

The standard 65SA model has three different capacity ratings: 65 tons in a 15-ft. (4.6 m), 2-point rigid load base as a 3+2 spread-axle trailer with 30 ft. of deck; 65 tons in a 30-ft., 2-point rigid load base as a 3+2 spread-axle trailer with the addition of an 8-ft. (2.4 m) deck insert (38 ft. [11.6 m] overall); and 70 tons in a 16-ft. (4.8 m), 2-point rigid load base as a 4-axle trailer with 30 ft. of deck.

For more information, call 800/348-5232 or visit www.talbertmfg.com.